Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.

Brake NVH Dynamometer


Model 3900

System Features

  • ProLink software for integrated control. data acquisition, analysis and reporting

  • Double Wall, Walk-in, Thermal and Noise Insulated Brake Enclosure

  • Fully capable of running SAE J2521

  • Flexible configuration for door openings to accommodate customer needs

  • Machine Mounted Electrical Components save floor space and ease installation


The Model 3900 Dynamometer provides capability for noise and vibration testing of brake corner and axle fixtures. This machine provides the ability to reproduce a wide range of brake noise issues. The system incorporates state-of-the-art technology for optimal correlation to actual operating conditions.

 

The brake enclosure is fully isolated from the dynamometer drive and support systems to reduce noise and vibration. The dynamometer enables close correlation with existing certification test protocols including SAE J2521. Additionally, the enclosure is constructed to allow environmental testing using one of several optional environmental conditioning units. The typical unit provides ranges of –20º C to 40º C and 20 to 90% relative humidity.

 

The ProLink software package integrates dynamometer operation, data acquisition, data analysis and reporting. The NVH module is based on the Brüel & Kjær Portable PULSE™ system. The PULSE™ system runs under the ProLink software package to maximize the ease of use while providing a full set of noise and vibration analysis capabilities.


Brake NVH Dynamometer
Model 3900

Typical Specifications
Software Package ProLink Microsoft Windows® based
Sample Rate Conventional channels: 2500 samples/sec/channel
Test Parts Conventional, Knuckle, Corner, Axle brake assemblies
Main Drive Motor 185 kW (250 HP) DC
Max. Speed 850/2000 rpm (Optional 850/2500 rpm)
Pressure 206 bar (3000 psi)
Brake Apply Servo air over brake fluid: 517 bar/sec (7500 psi/sec)
Mechanical Inertia Minimum: 41.1 kgm^2 (30.33 slug-ft^2)
2 Removable Discs: 75 kgm^2 (55.32 slug-ft^2) ea. disc
Maximum: 191 kgm^2 (141 slug-ft^2)
Movable Disc Engagement: Manual
Electric Inertia Simulation Minimum with Simulation: 4.9 kgm^2 (3.62 slug-ft^2)
Simulated Amount: See Inertia vs. Decel curve
(available upon request)
Control Accuracy: +/- 1.0%
Temperature 4 rotating (slip ring) and 4 non-rotating
Torque 5640 Nm (50,000 in-lbs) In-Line Non-Rotating

Options

  • Environmental Conditioning

  • DTV Measurement

  • Fluid Displacement

  • Water Spray Injection

  • Dust Spray Injection

  • AC and higher power motors

  • Parking Brake

  • Video Capture and Playback

  • Road Wheel System

For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.